Product Details
These 48V to 12V 3A POE+ Passive Gigabit Splitters are a special version that receives data and PoE power (Passive, NOT active) over a single Cat7/Cat6A/Cat6/Cat5e Ethernet cable and passes the 48V PoE input through to the output Ethernet jack, and it also splits off stepped down 12VDC power to a 5.5mm x 2.1mm x barrel plug rated at a max of 3 Amps. This will allow a non-PoE, 12 volt DC powered, device to be remotely installed along with a PoE powered device. Dual powered output.
The Splitter requires a 40V to 56 Volt PoE (power adapter) Gigabit Injector that combines (and injects) the power and the data into a single ethernet cable and sends it to the Splitter. A 48V PoE power injector is typically used and may be installed within 100M of the Splitter.
The unit’s data rate of Gigabit 10/100/1000 (GbE) transfer supports an ultra-fast maximum data rate of 1 Gigabit per second (Gbps - 1000 Mbps) and does not affect the speed performance of the local area network and devices.
***This unit can pass through 2.5Gbps as well.
The Splitter is equipped with a 5.5mm x 2.1mm barrel power plug which is compatible with most cellular router power connectors, as well as with numerous types of adapters.
SPECIFICATIONS:
PoE Protocol | Passive only |
Input Voltage | DC: 40V to 56V |
Output Current | DC: 12V 3 Amp, POE: 48V .75A |
Transfer Efficiency | >95% |
Pin Support | 1236/4578 Power |
Working Temperature | -20~80 ℃ |
Barrel Power Plug | 5.5mm x 2.1mm |